Call (210) 494-5800

Need Do-it-Yourself pest control? Click Here to Ask Big Al.

Draingel


Description
Restaurants and other food preparation facilities often experience sanitation problems associated with the buildup of kitchen grease (organic waste) in drains, cracks and crevices, and under heavy equipment. These problems include fruit and drain fly infestations, foul odors, and clogged (slow) drains.
DrainGel™ is a highly concentrated bacterial gel that digests grease buildup that accumulates over time. DrainGel’s™ proprietary formula includes MGD™ (Microbial Grease Degrader), a Bacillus strain that breaks down long-chain fatty acids – the primary component of problem grease deposits. Regular application also controls foul odors by inhibiting the biological production of odor-causing compounds such as hydrogen sulfide and rancid fatty acids that result from septic or anaerobic environments. DrainGel’s™ advanced biological support ingredients and essential growth factors promote the rapid germination and growth of its microbial blend resulting in increased effectiveness.
Hot water, bleach, detergents, and ordinary drain cleaners do not remove grease and organic waste. These compounds only break up grease deposits pushing them into drains and under equipment. DrainGel’s™ powerful formula contains over 550 billion cells per gallon (min. spec.). When introduced, its microbes immediately begin multiplying and digesting organic waste. DrainGel™ application is easy – it clings to the sides of drains and pipes and can also be easily sprayed under equipment and onto other hard-to-access areas.
DrainGel™ can also be foamed with excellent results.
Product Characteristics
Bacteria Count: 550 Billion/gallon
Bacteria Type: Blend of Bacillus Spores
Salmonella: Negative
Appearance: Blue-green
Fragrance: Herbal
Stability: 2 years+ at 35°F to 95°F
pH Value: 7.0-8.6
Performance Characteristics
Bacterial Pathways: Aerobic & Anaerobic
pH Range: 4.5-8.5
Temperature Range: 50°F to 145°F
Storage and Handling
Store in cool, dry place. Avoid eye contact. Wash hands thoroughly with warm, soapy water after contact.

Additional Information
www.bio-systems.com
American Bio-Systems
(888) 371-3353 • Fax (888) 708-5353
customersupport@bio-systems.comwww.bio-systems.com
Bacterial Formulation for Removal
of Organic Material from Drain Lines
and Non-Drain Areas
TMNonfood CompoundsProgram Listed - C1127371
Section 1 - Product
Product Name
Manufacturer/Distributor
Emergency Telephone Number
DrainGel
American Bio-Systems, Inc.
Phone: (888) 371-3353
Inquiry: American Bio-Systems, Inc.
Emergency: (888) 371-3353
Outside USA: (888) 371-3353
Section 2 - Ingredients
INGREDIENT
CAS NO.
OSHA
PEL
AGCIH
TLV/TWA
Proprietary Formulation
NA
NA
NA
ALL COMPONENTS APPEAR ON THE TSCA INVENTORY. COMPONENTS NOT LISTED ARE EITHER PROPRIETARY, NON HAZARDOUS OR IN CONCENTRATIONS OF LESS THAN 1%.
Section 4 - Fire/Explosion
Flash Point (Deg C)/Method Used
NA
LEL
NA
UEL
NA
Extinguishing Media
Water spray, carbon dioxide, and dry chemical powder
Special Fire Fighting Procedures
None
Unusual Fire and Explosion Hazards
None known
Section 6 - Health Hazard Data
Acute Health Affects
Ingestion
Ingestion may result in abdominal pain, nausea and vomiting.
Eyes
This product may cause eye irritation.
Skin Contact
Could cause mild skin irritation after prolonged contact.
Section 5 - Reactivity Data
Stability
Stable
Incompatibility
Not known
Hazardous Decomposition or By Products
Not known
Hazardous Polymerization
Will not occur
Section 3 - Physical Characteristics
Specific Gravity
Approx. 1.0
Boiling Point
Not known
Vapor Pressure
No data
Melting Point
N/A
Solubility
Complete
pH
7.0-8.6
Appearance and Odor
Blue liquid, perfumed
Vapor Density
No Data
HMIS rating (0-4): Health = 1, Fire = 0, Reactivity = 0
Material Safety Data Sheet
DrainGel™
Revised 3/7/2007
Section 7 - Spill or Leak Procedures
Steps to be taken in case material is spilled or leaked:
Waste Disposal Method: Contain and collect material, place in proper container for reuse or disposal. Dispose
of materials in accordance with all federal, state and local laws.
Precautions To Be Taken In Handling and Storage: Store in a location away from children, food items and potable water. Store in an area out of the direct sunlight, keep container closed when not in use, avoid storing in a damp environment.
Always wash hands with soap and water before handling food or smoking.
Use good chemical hygiene practices when working with any chemical.
Other Precautions: None
Section 6 - Health Hazard Data (continued)
Acute Health Affects (continued)
Conditions to Avoid
Strong acids or alkali compounds may inactivate biological cultures.
Inhalation
Inhaling mist from this product could cause irritation to the lungs and mucous membranes.
Signs and Symptoms of Over Exposure
None known.
Aggravated Medical Conditions
None known, however persons with respiratory problems should avoid breathing any mist from this product.
Emergency First Aid Procedures
Eye Contact
Rinse eyes with water for fifteen minutes; if irritation persists, see a physician.
Skin Contact
Wash the product off the skin with soap and water; if irritation develops, seek the care of a physician.
Ingestion
Watch victim for any signs of illness, induce vomiting only if advised
by a physician.
Inhalation
Move person to fresh air and avoid breathing mist from product. If breathing problems develop, seek the care of a physician.
Section 8 - Control Measures (PPE)
Ventilation
Local exhaust should be sufficient. If used in a manner that creates
a mist, mechanical ventilation may be necessary.
Respiratory protection
None required for normal use.
Protective gloves
Recommended. Disposable nitrite gloves are suitable for preventing
prolonged contact with the skin.
Other protective clothing
None required, however, avoid contact with the skin from soiled clothing.
Eye protection
Safety glasses with sides sheilds or splash goggles are recommended.
The information and recommendations contained in this Material Safety Data Sheet have been compiled from sources believed to be reliable and to represent current opinion on the subject when the MSDS was prepared. No warranty, guaranty or representation is made as to the correctness or sufficiency of the information. The user of this product must decide what safety measures are necessary to safely use this product, either alone or in combination with other products, and determine its environmental regulatory compliance obligations under any applicable federal, state and local laws.
Material Safety Data Sheet
DrainGel™
TM
Bacterial Formulation for Removal of Organic Material
from Drain Lines and Non-Drain Areas
DrainGel™ is a state-of-the-art formulation for removal of organic
material from drain lines and non-drain areas. DrainGel
™ contains MGD™ (Microbial Grease Degrader), a Bacillus
strain that breaks down complex grease molecules (kitchen grease). Best results are usually obtained by applying DrainGel
™ undiluted per the instructions. DrainGel™ is also effective
when foamed. For applications that require foaming,
see the foaming instructions.
FOR DRAINS
PREPARATION: If drain is not regularly used, pour 1-2 gallons of warm water into drain. For all applications, apply product at time of lowest drain use, ideally at end of day and after the use of all cleaning and sanitation products.
START UP: Add four ounces to each drain in area. Apply around edge of drain, attempting to coat sides of drain. Repeat dosage daily as necessary, usually for 5-7 days.
FOR MAINTENANCE: Apply four ounces per drain every one to two weeks.
FOR NON-DRAIN AREAS
PREPARATION: Remove loose and heavy surface organic material from area.
START UP: Spray DrainGel™ on area until wet. Repeat application
daily as necessary until organic material has been removed, usually for 5-7 days. DO NOT FOG INTO AIR OR APPLY TO AIR MOVING EQUIPMENT THAT MAY ATOMIZE PRODUCT.
FOR MAINTENANCE: Spray area every one to two weeks, adjusting frequency based on results.
FOR FOAMING APPLICATION
Mix 4 oz. DrainGel™, 2 oz. foaming agent, and 26 oz. water in a standard quart foamer. Foam into drains, cracks and crevices
and into hard to reach areas.
CAUTION
HARMFUL IF SWALLOWED: Ingestion may cause abdominal pain, nausea, or vomiting.
HARMFUL IF INHALED: Inhalation may cause irritation to lungs and mucous membranes.
CAUSES MODERATE EYE IRRITATION: Contact with eyes may cause eye irritation.
FIRST AID
IF SWALLOWED: Watch for any signs of illness. Induce vomiting
only if advised by physician.
IF INHALED: Remove person to fresh air. If breathing problems
develop, see a physician.
IF IN EYES: Rinse eyes with water for 15 minutes. Call a physician
if irritation persists.
FÓRMULA BACTERIAL PARA REMOVER MATERIAL ORGÁNICO DE LÍNEAS DE DRENAJE Y OTRAS ÁREAS
DrainGel™ es un producto con una fórmula bacterial revolucionaria
para la remoción de material orgánico de líneas de drenaje y de otro tipo de áreas. DrainGel™contiene MGD™ (degradador de grasa microbiana), una cepa de bacilo con patente en trámite que rompe las moléculas complejas de la grasa (grasa de cocina). Por lo general, se obtienen óptimos resultados aplicando DrainGel™ sin diluir de acuerdo con las instrucciones que se indican a continuación. DrainGel™ también
es eficaz cuando hace espuma. Para aplicaciones que requieren de espuma, consulte las instrucciones que se indican más abajo.
PARA DRENAJES
PREPARACIÓN: Si el drenaje no se usa periódicamente, vierta 1 a 2 galones de agua tibia en el drenaje. Para todas las aplicaciones, aplique el producto en el momento de menos
uso del drenaje, idealmente, al final del día o después de haber utilizado todos los productos de limpieza e higiene.
INICIO: Agregue cuatro onzas a cada drenaje en el área. Aplique alrededor del borde del drenaje, intentando recubrir los costados del mismo. Repita la dosis diariamente, según sea necesario; por lo general, durante 5 a 7 días.
MANTENIMIENTO: Aplique cuatro onzas por drenaje cada una a dos semanas.
PARA ÁREAS DISTINTAS DE LAS DE DRENAJE
PREPARACIÓN: Remueva el material orgánico suelto o pesado de la superficie del área.
INICIO: Pulverice DrainGel™ en el área hasta que esté húmedo.
Repita la aplicación diariamente, según sea necesario, hasta remover el material orgánico; por lo general, durante 5 a 7 días. NO APLIQUE PULVERIZANDO O A UN EQUIPO DE MOVILIZACIÓN DE AIRE QUE PUEDA ATOMIZAR EL PRODUCTO.
MANTENIMIENTO: Pulverice el área cada una a dos semanas;
ajuste la frecuencia sobre la base de los resultados obtenidos.
PARA APLICACIONES QUE REQUIERAN DE ESPUMA
Mezcle 4 oz. de DrainGel™, 2 oz de agente espumógeno y 26 oz de agua en un espumador estándar de un cuarto. Introduzca la espuma en los drenajes, grietas y hendiduras y en áreas de difícil acceso.
PRECAUCIÓN
PERJUDICIAL EN CASO DE INGESTA: La ingesta puede causar dolor abdominal, náuseas o vómitos.
PERJUDICIAL EN CASO DE INHALACIÓN: La inhalación puede causar irritación de pulmones y membranas mucosas.
CAUSA IRRITACIÓN MODERADA DE LOS OJOS: El contacto
con los ojos puede causar irritación.
PRIMEROS AUXILIOS
EN CASO DE INGESTA: Observe signos de enfermedad. Induzca
el vómito sólo si así lo indica el médico.
EN CASO DE INHALACIÓN: Saque a la persona al aire fresco.
Si tiene problemas para respirar, llame a un médico.
EN CASO DE CONTACTO CON LOS OJOS: Enjuague los ojos con agua durante 15 minutos. Si la irritación persiste, llave a un médico.

Draingel Bacterial Formulation - Organic Removal Drains - Size: 32 Oz $16.50
Click Here for Product Details! Draingel Bacterial Formulation - Organic Removal Drains - Size: 32 Oz
  • Removes hard to reach organic material from drain lines and non-drain areas
  • Reduces noxious drain odors and improves flow in slow drains
  • Designed to cling to the sides of drains and pipes
  • Can be sprayed onto hard-to-access non-drain areas
  • Safe for all plumbing and septics
  • Biodegradable, non-toxic, non-caustic and non-pathogenic
  • NSF Registered for use in food processing facilities
  • Salmonella free