Label and MSDS Information
KEEP OUT OF
REACH OF CHILDREN
See Back Panel for Additional
EPA Reg No. 9444- 217 EPA Est. No. 9444-LA-1
U.S. patents pending.
NET WEIGHT 14 oz. / 397 g
15% VOC Formulation
• Protects Up to 8 Weeks
• Killing Action and
• Keeps on Killing For
Up to 8 Weeks
• For Indoor/Outdoor Use
INERT INGREDIENTS............... 99.94%
D-Force™ HPX R E S I D U A L W I T H D E L T A M E T H R I N
38L34-3273-9-Rev. 12/04 (PNT 12/04)
KILLS: Ants, Bees, Bedbugs, Carpet Beetles, Centipedes,
Cockroaches, Crickets, Firebrats, Fleas, Flour Beetles,
Grain Beetles, Ground Beetles, Gnats, Midges, Mole
Crickets, Moths, Pillbugs, Silverfish, Sowbugs, Spiders,
Ticks and Many Other Crawling Insects.
Also Controls and Kills: Wood Infesting Pests -
Termites (Subterranean, Formosan & Drywood),
Carpenter Ants and Carpenter Bees.
FOR USE IN Food Handling Establishments, Including
Food Service, Manufacturing and Processing
Establishments, Such as Restaurants, Cafeterias,
Supermarkets, Bakeries, Breweries, Dairies, Meat,
Poultry & Egg Processing & Packaging Plants,
Canneries, Feed Handling Establishments Including Feed
Manufacturing and Processing Establishments.
Also For Use In Homes, Tents, Aircraft, Apartments,
Atriums, Attics, Automobiles, Basements, Bathrooms,
Boats, Bottling facilities, Buses, Cabins, Campers, Candy
Plants, Carports, Cat Sleeping Quarters, Clothes
Storage, Condominiums, Decks, Dens, Driveways,
Garages, Gazebos, Granaries & Grain Mills, Hospitals,
Hotels, Industrial Buildings, Kitchens, Laboratories,
Lanais, Living Rooms, Mausoleums, Offices, Parlors,
Patios, Pet Sleeping Areas, Play Rooms, Porches,
Railcars, Recreational Vehicles, Rooms, Schools, Ships
& Vessels, Solariums, Storage Areas, Sun Rooms,
Trailers, Trucks, Utility Rooms, Verandahs, Warehouses
HAZARDS TO HUMANS & DOMESTIC ANIMALS
CAUTION: Harmful if swallowed or absorbed through the skin. Prolonged or frequently repeated skin contact may cause allergic reaction in some individuals. Wash thoroughly with
soap and water after handling. Remove contaminated clothing and wash before reuse.
FIRST AID: If Inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth to mouth if possible. Call a
poison control center or doctor for further treatment advice. If on Skin or Clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call
a poison control center or doctor for treatment advice. If In Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses if present, after the
first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. If Swallowed: Call a poison control center or doctor for treatment advice. Have
person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by the poison control center or doctor. Do not give anything by mouth to an unconscious
person. Hot Line Number: Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For emergency information, call
(985)878-6751 Monday through Friday 8:00am to 4:30pm CST. After 4:30pm, call your poison control center. For product information call (203)597-1812, Monday – Friday 8:00am to
5:00pm EST. Note to Physician: Contains petroleum distillate – vomiting may cause aspiration pneumonia.
ENVIRONMENTAL HAZARDS: This product is toxic to fish. Do not apply directly to any body of water.PHYSICAL OR CHEMICAL HAZARDS: Flammable. Contents under pressure. Keep
away from heat, sparks and open flame. Do not puncture or incinerate container. Exposure to temperatures above 130°F may cause bursting. Do not use in the vicinity of open flame or
Part No. 34-3273CBR
DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. This product has residual action which keeps on killing for up to 8
weeks after you spray. Remove pets, birds and cover fish aquariums before spraying. Hold container upright. Do not spray up into air. Remove protective cap and direct spray away
from face. Hold can 12-15 inches from surface being sprayed. Press button down and spray as directed. Spray surface until slightly wet. INDOOR: Cockroaches (including adult and
immature stages of both non-resistant and organophosphate and carbamate resistant strains), ants, booklice, boxelder bugs, centipedes, crickets, dermestids, firebrats, fleas, palmetto
bugs, silverfish, sowbugs, ticks and waterbugs: Apply thoroughly to all areas where these pests crawl and hide, especially in cracks and crevices, and hidden areas around sinks and
storage areas, behind baseboards, around doors and windows, behind and under refrigerators, cabinets, sinks and stoves, the underside of shelves, drawers, bookcases, and similar
areas. When pests are driven out, spray directly. Repeat as necessary. Ants: Spray freely around ant trails, doors and windows and other places where ants enter the house. Ticks and
Fleas on Surfaces: Remove pet bedding and destroy or clean thoroughly. Spray pet resting quarters. Adult fleas and larvae contacted by spray will be killed. Put fresh bedding down
once spray has dried. Do not spray animals directly. For best results, pets should be treated with an appropriate product before allowing them to return to the treated area. Spray rugs
and carpets where infestations are bad. Test first for staining on an inconspicuous piece prior to use. Bedbugs: Remove linens and wash before reuse. Apply to mattresses, especially
tufts, folds and edges until moist. Apply to the interior of the frame. Allow to dry before remaking bed. Treat baseboards, molding and spot treat floors. Spiders: Apply along and
behind baseboards, to window and door frames, corners, pipes, storage localities, attics, crawl spaces and other areas over which these pests may crawl. Centipedes, Ground Beetles,
Pillbugs, Sowbugs and Ticks: Apply around doors and windows and other places where these pests may enter premises. Treat baseboards, storage areas and other locations where
these pests are found. PANTRY PESTS – Grain Beetles (Rusty, Merchant and Saw-toothed), Flour Beetles (Red and Confused), Chocolate Moths, Cigarette Beetles, Clover Mites,
Cluster Flies, Drugstore Beetles, Elmleaf Beetles, Rice Weevils, Lesser Grain Borers, Spider Beetles and Tobacco Moths: Treat exposed stages. Remove all food-stuffs, utensils
and shelf paper from area to be treated. Discard used shelf paper and any infested foodstuffs. Apply spray to shelves and in cracks and crevices behind and under cupboards and
cabinets. Allow spray to dry prior to replacement of shelf paper, food and utensils. Carpet Beetles (Black, Furniture and Varied): Spray on and under edges of floor coverings, under
rugs and furniture and in closets or other localities where these insects are found. Webbing Clothes Moths: Use this product as a crack and crevice treatment in closets and other
storage areas where these pests are found. This is an adjunct treatment and will not control moth larvae already on clothes. Do not apply to clothing. Food/Feed Handling
Establishments: For control of all labeled pests, applications are permitted in food/feed and non-food/non-feed areas of food/feed handling and processing establishments as a general
surface, spot or crack and crevice treatment. This product is authorized for use in Federally Inspected Meat and Poultry Plants as a crack and crevice treatment. Do not use in
commercial food/feed handling establishments, restaurants, or other commercial establishments while food is commercially prepared, processed, or served. In the home, all food
processing surfaces should be covered during treatment or thoroughly washed before use. Exposed food/feed should be covered or removed. Food/Feed handling establishments are
defined as places other than private residences in which exposed food/feed is held, processed, prepared or served. Included also are areas for receiving, storing, packing (canning,
bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups) of food/feed. Serving areas where food/feed is
exposed and the facility is in operation are also considered food/feed areas. Non-Food/Non-Feed Areas: Examples of non-food/non-feed areas include garbage rooms, lavatories, floor
drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, mop closets and storage (after packaging, canning or bottling). All areas that insects
inhabit or through which insects may enter should be treated. General Surface Applications: Do not use this application method in the food/feed handling areas of the facility when the
facility is in operation or foods/feeds are exposed. Do not apply directly to food/feed products. Cover or remove all food/feed processing and/or handling equipment during application.
After application in food/feed processing plants, cafeterias and similar facilities, wash all equipment, benches, shelving and other surfaces which food/feed will contact. Clean food/feed
handling or processing equipment and thoroughly rinse with clean, fresh water. After application in bakeries, clean all food contact surfaces thoroughly with appropriate equipment.
Spot or Crack & Crevice Applications: Except in federally inspected meat and poultry plants, spot or crack and crevice applications may be made while the facility is in operation
provided exposed food is covered or removed from area being treated prior to application. Do not apply directly to food or food-handling surfaces. In the home, do not allow spray to
contact food/feed surfaces. If it does, clean surfaces with soap and water. Do not apply directly to food. Volumetric Treatment of Food Areas and/or Food Handling Establishments:
Cover or remove any food and food processing equipment during application. Do not apply while food processing is underway. After space spraying food processing plants, thoroughly
wash all equipment, benches, shelving, etc. where exposed food will be handled and rinse with potable water. OUTDOORS: Point nozzle away from face. Hold can on a slight downward
angle, approximately 12-15 inches from surface to be sprayed. For best results, spray when air is calm. Spray with wind if breeze is blowing. PESTS ON OUTSIDE SURFACES OF
BUILDINGS: For control of building infestation to ants, clover mites, crickets and sowbugs (pillbugs). Spray foundation of building where insects are active and may find entrance up
to a height of 2 to 3 feet. Apply as a residual spray to outside surfaces of buildings where insects tend to congregate. Spray areas include areas such as screens, window frames, eaves,
porches, patios, garages and refuse dumps. CRAWLING INSECTS: Ants, Cockroaches, (including Asian Cockroaches), Centipedes, Crickets, Mole Crickets and Silverfish. Spray
infested surface of patio or picnic area, hitting as many insects as possible. Also spray legs of tables and chairs to repel ants. Ants: Apply to ant trails, around doors and windows and
other places where ants maybe found. Lone Star Ticks, Dog Ticks, Crickets, Fleas and Earwigs: Apply thoroughly to infestation in bushes, grass or weeds. Wasps, Mud Daubers,
Hornets and Bees: Spray nests and bees directly. FLYING INSECTS: Houseflies, Gnats, Mosquitoes and Small Flying Moths: Use only on outdoor surfaces. Spray outside surfaces of
window and door frames and other areas where these pests may enter the home. Also spray localized resting areas, such as under eaves, porches, light fixtures and cords, railings, etc.
where these insects may rest. Insects coming to rest on treated surfaces will be killed. WOOD INFESTING INSECTS: Termites* (Subterranean, Formosan and Drywood) – For control
of above-ground termites in localized areas, apply to voids and galleries in damaged wood, and in spaces between wooden structural members and between the sill plate and
foundation where wood is vulnerable. Applications may be made to inaccessible areas by drilling, and then injecting with the supplied void injector into the damaged wood or wall
voids. These application are not a substitute for mechanical alteration, soil treatment or foundation treatment but merely a supplement for controlling active infestations of subterranean
termites. Termite carton nests in building voids may be injected using a void injector. It is desirable to physically remove carton nest material from building voids when such nests are
found. This type of application is intended to be a supplemental treatment for control of drywood and above-ground subterranean termites and other wood-infesting insects.
Application to attics, crawl spaces, unfinished basements, or manmade voids may be sprayed to control exposed worker and winged reproductive forms of termites. For control of
swarming or reproductive stages of termites, spray to the swarm or area on which they collect. The purpose of such applications of this product is to kill workers or winged
reproductive forms which may be present at the time of treatment. Such applications are not a substitute for mechanical alteration, soil treatment or foundation treatment but are
merely a supplement. This product is not recommended as sole protection against termites. For active indoor termite infestations, get a professional inspection. For control of aboveground
termites inside trees, utility poles, fencing and decking materials and similar structural members, drill to find the interior infested cavity and spray using void injector. Termite
carton nests in trees may be spray injected with product using the supplied void injector. Multiple injection points to varying depths may be necessary. It is desirable to physically
remove carton nest material from trees when such nests are found. Carpenter Ants: For effective control in houses and other structures , apply as general surface, spot, crack and
crevice or wall void application. Apply around doors and windows and other places where ants may enter the premises and where they crawl and hide. Spray into cracks and crevices
or through small drilled holes into voids where these ants or their nests are present. For control of carpenter bees in structures, spray the liquid directly into gallery entrance holes.
Following treatment, the entrance holes may be left open 24 hours to be certain that returning adult bees are killed. When there is no activity, the hole may be sealed with a suitable
STORAGE AND DISPOSAL
Storage: Do not store near heat or open flame. Store in a cool, dry area away from children. Container Disposal: Replace cap, wrap container in several layers of newspaper and
discard in trash. Do not incinerate or puncture. Can may be disposed of with other recyclables where local law permits.
NOTICE: Buyer assumes all responsibility for safety and use not in accordance with directions.
Waterbury Companies, Inc.
P.O. Box 1812 Waterbury CT 06722 Made in USA
(800)845-3495 - www.CBProProducts.com
MATERIAL SAFETY DATA SHEET MSDS Number 343273CB
1. PRODUCT AND COMPANY IDENTIFICATION Product Name: CB D-FORCE HPX RESIDUAL INSECTICIDE- ALL SIZES (15% VOC COMPLIANT) - EPA REGISTRATION #9444-225
Manufactured by: Waterbury Companies, Inc.
P.O. Box 640
Independence, LA 70443
24-Hour Emergency Contact:
800-424-9300 or 703-527-3887
2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components greater than 1.0% (0.1% if carcinogen or suspected carcinogen)
Component CAS# OSHA PEL ACGIH TLV Other Limits % by wt.
Deltamethrin (S)-alpha-cyano-3-phenoxybenzyl- 52918-63-5 N.E. N.E. 0.06
STEL 100 ug/m3
Non-hazardous components N/A N/A N/A N/A 85-100
* This item is NOT a carcinogen, but has been listed to aid in the identification of all pesticide active ingredients in the product. Actual
percentages for these active ingredients have been listed vs. percent ranges.
3. HAZARDS IDENTIFICATION Contents under pressure, do not expose to fire or extreme heat.
Do not contaminate food or feed. Do not apply directly to food. Do not apply to classrooms when in use. Do not apply this product in
occupied patient rooms or in any rooms while occupied by the elderly or infirm.
Potential Health Effects:
Routes of Entry: Inhalation: Yes Ingestion: Yes Skin: Yes
Health Hazards: Harmful if swallowed or absorbed through the skin. Avoid contact with skin, eyes, or clothing. Prolonged or frequently
repeated skin contatact may cause allergic reactions in some individuals. Wash thoroughly with soap and water after
handling. Remove contaminated clothing and wash before reuse.
Dizziness, headaches, drowsiness, incoordination, eye irritation, dermatitis, skin disorders, nausea, throat irritation,
loss of consciousness, and other nervous system disorders. Prolonged skin contact may cause mild to moderate
local redness and swelling.
Medical conditions aggravated
Skin contact may aggravate an existing dermatitis. Persons with a pre-existing disease of the central
nervous, cardiovascular, or respiratory system may have increased susceptibility to the toxicity of
excessive exposures. Persons with history of asthma, emphysema, and other respiratory tract
disorders may experience symptoms at low exposures.
NFPA Hazard Ratings Fire: 1 Health: 1 Reactivity: 1
NFPA 704 Ratings are subject to interpretation and are only intended for general identification of the level of the specific hazard. All
information must be considered for proper safe handling of the material.
4. FIRST AID MEASURES
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by
mouth to mouth, if possible. Call a poison control center or doctor for further treatment advice. IF ON SKIN OR CLOTHING: Take off
contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for
treatment advice. IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if
present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. IF
SWALLOWED: Immediately call a poison control center or doctor. Do not induce vomiting unless told to do so by a poison control
center or doctor. Do not give any liquid to an unconscious person. Do not give anything by mouth to an unconscious person. HOT LINE
NUMBER: Have the product container or label with you when calling a poison control center or doctor, or going for treatment. For
emergency information, call 985-878-6751, Monday through Friday 8:00AM to 4:30PM CST. After 4:30PM call your poison control
center. For product information call 203-597-1812 Monday through Friday, 8:00AM to 5:00PM EST. NOTE TO PHYSICIAN: Contains
petroleum distillate - vomiting many cause aspiration pneumonia.
5. FIRE FIGHTING MEASURES Fire Fighting Procedures: Self contained air supply suggested. Keep containers cool to avoid bursting.
Unusual Fire and Explosion Hazards: Exposure to temperatures above 130 deg.F may cause bursting.
Extinguishing Media: CO2, dry chemical, or foam
6. ACCIDENTAL RELEASE MEASURES
Stop release, if possible without risk. Dike or contain release, if possible, and if immediate response can prevent further damage or
danger. Isolate and control access to the release area. Take actions to reduce vapors. Absorb with appropriate absorbent such as sand
or vermiculite. Clean spill area of residues and absorbent.
7. HANDLING AND STORAGE
Store in a cool, dry area away from heat or open flame. Do not contaminate water, food, or feed by storage or disposal.
Level 1 Aerosol
NFPA 30B Aerosol Classification:
Revision Date 5/13/2005 Date Printed: 5/13/2005 Page 1 of 2
MATERIAL SAFETY DATA SHEET MSDS Number 343273CB
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective Gloves: Not required - avoid contact with skin.
Eye Protection: Not required - avoid contact with eyes.
Respiratory Protection: Recommended in confined space.
Ventilation: Local: As required to keep airborne concentrations below acceptable limits.
Mechanical: Not required.
Other protective equipment: Safety glasses recommended to avoid possible contact with eyes.
Protective Work/Hygiene Practices: Follow label instructions.
9. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure (mm Hg): N.E. Boiling Point: N.E.
Specific Gravity (H2O=1): 1.093
Melting Point: N/A
Solubility: Insoluble Appearance/Odor: Clear colorless liquid
Flashpoint: Non Flammable per flame projection test. LEL: N/A
10. STABILITY AND REACTIVITY Conditions to Avoid: Open flames and very hot surfaces may cause thermal decomposition.
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition By-products: Ambient temperatures, unlikely; in a fire, toxic oxides of Nitrogen and Carbon.
Hazardous Polymerization Conditions: None known.
11. TOXICOLOGICAL INFORMATION This product contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen lists. Any further information on the toxicology of the material can be obtained by contacting the manufacturer.
12. ECOLOGICAL INFORMATION Please call the manufacturer for questions concerning the ecological effects of this product and it's constituents.
13. DISPOSAL CONSIDERATIONS Do not puncture or incinerate! IF EMPTY: Place in trash or offer for recycling if available. IF PARTLY FILLED: Call your local waste
agency or 1-800-CLEANUP for disposal instructions.
14. TRANSPORT INFORMATION DOT (USA): Regulated Consumer Commodity (per 49CFR173.306) ORM-D N/A N/A
IATA (Air): Regulated Consumer Commodity 9 ID8000 N/A
IMDG (Vessel): Regulated Aerosols 2 UN1950 N/A
National Motor Freight Classification and LTL Class: 102120-Class 60
15. REGULATORY INFORMATION SARA Title III Section 312: When completing Tier II reports, the following information should be used.
This product should be described as:PURE: N MIXTURE: Y SOLID: N LIQUID: Y GAS: Y
Physical Hazards: FIRE: Y PRESSURE: Y REACTIVITY: Health Hazards: N IMMEDIATE: Y DELAYED: Y
16. OTHER INFORMATION
Revision Notes: REVISION OF MSDS
MSDS Prepared by NT
This Information is provided in good faith, but no warranty, expressed or implied, is made. The manufacturer believes that it is
accurate and to the best of its knowledge, and relates only to the specific material designated herein.
Product Sales Information: 800-845-3495
MSDS Information: 985-878-6751